Home > Uncategorized > Different Types of Machining Process

Different Types of Machining Process

TYPES OF MACHINING PROCESSES-

There are many different types of Machining processes. They are already mentioned in the previous posts. All the types of Machining processes are again described in one post. They are as follows-

http://www.novelmech.com

1. Conventional or Non-traditional Machining Process-

Oldest Machining processes which are not commonly used.

2. Non-conventional or Modern Machining Process-

Latest machining processes which are currently in trend and are most commonly used techniques.

3. Ultrasonic Machining Process

This Machining Process uses high frequency sound waves to take off the material from the work piece.

4. Abrasive Jet Machining Process

This Machining Process uses abrasives to take off the material smoothly.

5. Water Jet Machining Process

This Machining Process uses water to take off the material. The water comes with very high velocity.

6. Abrasive Water Jet Machining Process

This Machining Process uses both the high velocity water and abrasive flow to take off the material from the work piece.

7. Electro Chemical Machining Process

This Machining Process uses both Electric power and the chemical energy for the removal of material from the work piece.

8. Electro Chemical Grinding Process

This Machining Process uses both Electric power and the chemical energy for the grinding of material from the work piece.

9. Electro Chemical Honing Process

This Machining Process uses a stone to rub against the work piece and then to take off the material. This takes place with the help of electric power.

10. Electro Chemical Deburring Process

This Machining Process uses deburring technique to remove the material from the work piece. This takes place with the help of electric power.

11. Electric Discharge Machining

This Machining Process uses sparks to take off the material off the work piece and to attain a desired shape.

12. Electric Discharge Grinding

This Machining Process uses the techniques of Electric Discharge Machining Process. Grinding tool is employed in this Machining Process.

13. Wire Electric Discharge Machining

In this Machining Process, a wire is used ( Heated ), and it is used for the removal of excess material.

14. Electron beam Machining

This Machining Process uses an electron beam for the removal of material from the work piece.

15. Laser Beam Machining

This Machining Process uses very high power Laser beam to remove the excess material from the work piece.

16. Plasma Arc Machining

This Machining Process uses Plasma to remove the excess material in the work piece.

There are special machining processes.

They are as follows-

1. Magnetic Abrasive Finishing

2. Abrasive Flow Finishing

3. Electro stream Drilling

4. Shaped Tube Electrolytic Machining

These are the different types of Machining Processes.

Check Also

Types of Welded Joints

Types of Welded Joints – There are usually five different types of welded joints. They …

Leave a Reply

Your email address will not be published. Required fields are marked *